Construction process needs a large number of steel bars with different lengths. Therefore, a rebar straightening machine will be needed. It can straighten the plate reinforcement or threaded steel bar and cut it off as required. How to operate the rebar straightening machine correctly is the key point to improve the efficiency of steel bar cutting. In order to make the rebar straightening machine achieve good efficiency, we need to pay attention to the following points when operating:
1. Sundries or materials shall not be placed on the rebar straightening machine to prevent objects from falling into the machine due to vibration generated during the operation of the machine. Immediately release the hand and keep a certain distance from the machine after sending the steel bar to the press roller. Gloves must be worn during operation to avoid accidents.
2. Rebar straightening machine straightens the steel bar by two rows of rollers. If the straightening effect of steel bar is not good, the offset of the pinch roller should be adjusted appropriately by adjusting the upper adjusting roller until the straightened steel bar achieves satisfactory effect.
3. After rebar straightening machine processing a certain number of steel bars, the length of steel bars should be measured. If there is any deviation, it should be adjusted appropriately. At present, rebar straightening machine is digitally controlled, and there is almost zero error in cutting length.
4. The maintenance of rebar straightening machine is also the key point in use. Good maintenance can keep the machine in good precision and running state for a long time. Therefore, we should carry out relevant maintenance on the machine regularly.
Rebar straightening machine should be operated according to the correct method, which can ensure the safety of operation and improve the efficiency of straightening and cutting steel bars.