Classification of the Truss Girder Welding Machine
The truss girder welding machine are often classified according to mechanical sketches, shapes of appearance and structural features.
① According to the mechanical diagram, it is divided into simple and continuous; static and hyperstatic, flat and spatial. The simply supported truss girder welding machine are the most widely applied.
② According to the contour, it can be divided into triangles, trapezoids, parallel strings and polygons. The trusses with steep roof slopes often use triangular truss girder welding machine, and the span is generally below 18~24 meters. The trusses with flat slopes often use trapezoids truss girder welding machine with a span of 18~36 meters, which is widely used. Other types of truss girder welding machine are often constructed with relatively simple parallel steel trusses. Polygonal truss girder welding machine are more to be stressed, but they are more complicated to manufacture and are used only in long-span truss girder welding machine at some times. The tower is usually in the shape of a straight line or a broken line.
③ According to the internal force of the rod, the cross section of the rod and the structural characteristics of the joint, it is divided into ordinary, heavy and light truss girder welding machine. Ordinary truss girder welding machine generally use single-abdominal rods, usually T-sections composed of two steel angles, and sometimes cross-shaped, trough-shaped or tubular-shaped sections are adopted too, connected by a gusset plate at the joint, simple structure and most widely applied. Heavy-duty truss girder welding machine with a shape or box section composed of steel board or steel section, the joints are connected with two parallel gussets; they are often used for truss girder welding machine with large spans and loads, such as bridges and large-span roof structures. The light truss girder welding machine is made up of small angle steel and round steel or thin-walled steel; the joints can be connected with gussets, and the bars can be directly connected; it is mainly used for small span and light roof structures.
September 4, 20191. Relief method for the failure of the wire straightening and cutting machine starting up normallyWhen the machine has a fault that can only be jogged and cannot be started normally, check the contro...view
September 25, 2018It is well known that rebar bender and cutter are designed to cut off all kinds of round steel, thread steel fixed-length cutting operation is a very typical rebar processing equipment. It is widely u...view
November 29, 2021The application of steel bar bending machine is very extensive. It can be said that it is often used especially in the field of steel and construction. It has a lot of performance, good bending effect...view
January 4, 2021The wooden structure is the mainstream in the Chinese ancient architecture, which has the disadvantages of being flammable, not anti-seismic, vulnerable to corrosion, etc. Therefore, people have inven...view
May 13, 2019Truss Girder Welding Machine SummaryMore and more building structures are used in the structure of the steel truss, especially the special type steel frame used in the stadium, exhibition hall and oth...view
June 18, 2019Processing technology of wire cages Technological process1. Construction lofting of bench formwork and mould.2. Steel inspection→ construction lofting and laying-off of reinforcement.3. Installation ...view